5.6 Scene
5.6.1 Introduction
This feature enables selected luminaires to ignore occupancy & auto operation parameters and adopt a constant light output & color temperature for a specific period of time or until scene exit conditions are met. There are a total of 8 scenes that can be configured and customized to different parameters.
How to identify: If a sensor node is in a scene its green LED will blink continuously as opposed to blinking in response to an occupancy.
5.6.2. Scene Configuration
Toggle relay on for whole zone or off for selected node only
Select the desired scene from the drop-down menu
Choose a desired scene dimming level (Dim +/- button or Slider)
Click save to scene under scene dimming
Choose a Color Temperature (using Warmer/Cooler, Slider or level from list)
Click save to scene under color temperature
Choose the desired Scene Exit condition
Save settings to store all configuration for this scene
Note that the nodes will only revert back to responding to occupancy and ambient light once they exit the scene, or when you select the “Revert to Auto Mode” button on the Response App to exit the scene and return the lights to normal operation.
The default light output varies for different scenes (click here for more details). The scene exit time, however, by default for all scenes is exit on absence which means if space remains unoccupied for dwell time (e.g. 10 minutes) + lowlight time (e.g. 10 minutes) = 20 minutes of no occupancy.