...
Sr # | Product Version | Release Date | Firmware Version | Release Notes |
|---|
1 | 1.0 | 25 Oct 2018 | PIC: 172 | First release of sensor node 3 Over-the-air upgrades Implemented Emergency Light Monitoring & Testing (ELMT) to support testing of compliant/approved EM gear connected to sensor node 3 over DALI Bug fixing and performance improvements
|
Nordic: 07 | Upgraded the wirepas stack* version to 3.4.46 from 3.2
|
2 | 2.0 | 18 Jan 2019 | PIC: 173 | Fixed bugs to avoid sensor node reset after emergency testing
|
Nordic: 08 | Improved energy consumption Improved DALI addressing
|
3 | 3.0 | 01 Mar 2019 | PIC: 174 | Fixed bug and performance improvements Implemented ability to query wireless link power
|
Nordic: 10 | Upgraded the Wirepas stack to 4.0.50 Added EnOcean wall switch capability
|
4 | 3.1 | 22 Mar 2019 | PIC: 174 | No change
|
Nordic: 11 | Improved OTAP
|
5 | 3.2 | 18 Apr 2019 | PIC: 175 | Fixed bug for Automated self-test sequence Fixed PIR false triggers Fixed ambient light sensing bug
|
Nordic: 12 | Performance improvements Fixed EnOcean single rocker issue Added wireless linking functionality
|
6 | 3.3 | 20 May 2019 | PIC: 176 | Fixed red dome LED intensity
|
Nordic: 13 | Improvement to RF Tx notifier
|
7 | 3.4 | 11 Jun 2019 | PIC: 177 | Performance improvement
|
Nordic: 14 | Performance improvement
|
8 | 3.5 | 26 Aug 2019 | PIC: 178 | Enabled status reporting for all sites (portal status messages from nodes) Fixed light level bug where light levels were set to low light after running and emergency test
|
Nordic: 15 | Improved OTAP feature Improved querying Nordic version through gateway
|
9 | 3.6 | 07 Oct 2019 | PIC: 179 | Improved boot up to allow driver configuration. Fixed unresponsive node bug
|
Nordic: 15 | No change
|
10 | 3.7 | 15 Nov 2019 | PIC: 180 | Implemented disabling & query of double dwell time
|
Nordic: 15 | No change
|
11 | 3.8 | 09 Dec 2010 | PIC: 180 | No change
|
Nordic: 16 | Upgraded Wirepas stack to 4.0.68 Improved internal messages to support OTAP
|
12 | 3.9 | 27 Feb 2020 | PIC: 181 | Implemented Subnode capability Support EnOcean switch ID pairing Performance improvements Improved consistent boot up sequence
|
Nordic: 17 | Support for switch ID pairing mode Improved DALI device count for Subnodes
|
13 | 4.0 | 27 Aug 2020 | PIC: 182 | Implemented Low Level Interface Fixed a bug where sensor node reporting was affected during EM duration test. Performance improvement Ability to reset/readdress attached devices
|
Nordic: 18 | Introduced Beacon feature Implemented support for Mobile SDK Improved sensor node testing
|
14 | 4.1 | 16 Oct 2020 | PIC: 183 | Implemented fix for a bug related to Low Level Interface
|
Nordic: 18 | No change
|
15 | 4.2 | 26 Apr 2021 | PIC: 184 | Implemented Tunable White capability Improved Automated Self-Test sequence to support Color Temperature Test at boot up
|
Nordic: 19 | Introduced support for Bluetooth supported Mobile App
|
16 | 4.3 | 25 May 2021 | PIC: 184 | No change
|
Nordic: 20 | Fixed a bug that affected sensor node reporting for the Portal
|
17 | 4.4 | 10 Jan 2022 | PIC: 185 | Implemented Advanced Driver Metrics Implemented logging of changes in configuration parameters
|
Nordic: 21 | Fixed a bug associated with area mapping
|
18 | 4.5 | 23 May 2022 (OTAP) 14 Jun 2022 (Production) | PIC: 186 | Fixed colour temperature change issue where some TW devices don’t change colour when sent immediately after a dimming command via app Fixed an issue where the colour temperature change is delayed around 30s to 1 min on some TW devices when applied as a scene
|
Nordic: 22 | Fixed an issue where the function test runs every 6 hours and the duration test every 24 hours with the Generation 2 of Tridonic Emergency Controllers Fixed an issue where the sensor node can sometimes repeatedly send a relayed command to its zone after receiving a dim command from an Enocean switch (aka) cyclic dimming
|
19 | 4.6 | OTAP only - not released to production | PIC: 187 | Changed the values of the following DALI configuration parameters: Power On Level from 0% to 100% Minimum Level from 0% to 0.1%
|
| | Nordic: 22 | No changes |
20 | 5.0 | 28 Feb 2023 | PIC: 188 | Passive Nodes compatibility Channel Link - Groups & configuration via the express app Blink Luminaires via express app EnOcean switch address query and support with express app Set & query default colour temperature through express app Query absence detection via express app Double dwell disabled by default A few bug fixes
|
Nordic: 24 | Upgraded Wirepas stack to 5.1 Node selection support through express app and BLE improvements
|
21 | 5.1 | May 2023 | PIC: 189 | Improved timing for automated self test sequence
|
Nordic: 24 | No change
|
22 | 5.2 | 04 Sep 2023 | PIC: 190 | Improved support for blink luminaires Prevention of dim down to zero (use subject to future app release)
|
Nordic: 25 | Bug fixing and a few improvements
|
23 | 5.3 | 28 Nov 2023 | PIC: 190 | No changes |
Nordic: 26 | Sony Nimway support
|
| Info |
|---|
NOTE on Intercompatibility: It is important to note that for RF connectivity (Wirepas mesh) and Nordic based solutions such as portal, API, BACnet the stack version is very important. In simple terms, 3.4.46 is compatible with 3.x however, 3.2 is not supported by Cascade gateways. All stack 4 nodes are compatible with any stack 4.x sensor nodes All stack 5 nodes are compatible with other stack 5.x sensor & passive nodes.
Whereas, irrespective of Nordic solution and stack versioning the lighting control operations are all compatible across 171 to the future versions over IR and can be used in any combination |
...
Sr # | Product Version | Release Date | Firmware Version | Release Notes |
|---|
1 | 2.0 | 28 Feb 2023 | Nordic: 02 | Wirepas stack 5.1 First release of Passive Node Publisher - Subscriber groups Blink pubsliher/subscriber/group through express app EM support App selection & configuration Portal mapping support
|
2 | TBD | Nov 2023 | Nordic: 03 | Query number and device types (subject to future app release)
|
...
Another way to visualize the available functionality is in the following table. Which shows which versions are required for each major function. The version shown below indicate the minimum required firmware version that can support the functionality. However, it is always recommended to refer to above table to see which finalized version addresses all the bugs related to any solution and should be deployed to suit your solution.
| Sensor Node | Passive Node |
|---|
Feature | PIC Firmware Required | Nordic Firmware Required | Nordic |
|---|
Over-the-air upgrades (OTAP) | 172 | | 02 |
Emergency Light Monitoring & Testing | 172 | 07 | 02 |
Stack upgrade from 3.2 to 3.4.46 | | 07 | N/A |
Improved energy consumption | | 08 | N/A |
Improved DALI addressing | 173 | 08 | 02 |
Query Wireless Link power | 174 | | N/A |
Support for EnOcean Wall Switches | 174 | 10 | N/A |
Stack upgraded from 3.4.46 to 4.0.5 | | 10 | N/A |
Wireless Link Functionality | 175 | 12 | N/A |
Status reporting in the Portal (Backpack mode) | 178 | 15 | 02 |
Driver configuration at boot-up | 179 | | 02 |
Disable & query double dwell time | 180 | | N/A |
Upgraded stack from 4.0.5 to 4.0.68 | | 16 | N/A |
Support for Subnodes | 181 | | 02 |
EnOcean switch ID pairing | 181 | | N/A |
Switch ID pairing mode | 181 | 17 | N/A |
Low Level Interface | 182 | | N/A |
Bluetooth Beacons | | 18 | N/A |
Mobile SDK | | 18 | N/A |
Tunable White | 184 | | 02 |
Support for OR Express, a Bluetooth controls mobile app | | 19, 20 | 02 (No control) |
Advanced driver metrics & Configuration Parameters change logging | 185 | 21 | N/A |
Support for generation 2 Tridonic EM device that don’t support percentage battery charge information | 186 | 22 | 02 |
Passive Node (compatibility) | 188 | 23 | 02 |
Channel Link | 188 | 23 | N/A |
EnOcean Switch Address query | 188 | 23 | N/A |
Absence detection mode query | 188 | 23 | N/A |
Double dwell disabled by default | 188 | 23 | N/A |
Passive node - Query number and device types (subject to future app release) | N/A | N/A | 03 |
Sony Nimway support | N/A | 26 | N/A |
Blink the luminaires connected to a node via portal | 190 | 26 | Not supported |
